| Pressure delivery | 1 – 65 mbar +-(4% + 2mbar) |
| Volume delivery | 200 – 2000 ml +-(15% + 4ml) |
| Oxygen delivery | 21 – 100 % +-(2.5% + 2.5vol%) |
| Pressure monitoring | +-(4% + 2mbar) |
| Volume monitoring | +-(15% + 4ml) |
| Oxygen monitoring | +-(2.5% + 2.5vol%) |
info@ppslasers.com | Corporate Office: (323) 389-6028
Pressure Controlled Ventilation (PC) Pressure Regulated Volume Controlled Ventilation (PRVC) Pressure Support Ventilation (PS) Continuous Positive Airway Pressure Ventilation (CPAP)
A dynamic respiratory device for acute care, the MediVent ICU is built to help patients breathe easier while optimizing comfort. The MediVent ICU was engineered to provide a flexible solution for acute respiratory conditions with intuitive technology,
straightforward functionality and portability. Utilizing one of the top respiratory modules available, with an integrated high performance turbine motor—making it independent from compressed air. The MediVent ICU balances robustness and safety with sensitivity and comfort to the patient.
straightforward functionality and portability. Utilizing one of the top respiratory modules available, with an integrated high performance turbine motor—making it independent from compressed air. The MediVent ICU balances robustness and safety with sensitivity and comfort to the patient.
This provides critical care solutions and respiratory therapies for the ICU, as well as invasive and non-invasive breathing assistance for adult and pediatric patients.
Ventilation Modes
Pressure Controlled Ventilation (PC)
This mode allowing the patient to trigger a synchronized breath.
Pressure Regulated Volume Controlled Ventilation (PRVC)
This mode allowing the patient to trigger a synchronized breath. The mode determines the driving pressure above peep as such to guarantee the expired volume, Vte.
Pressure Support Ventilation (PS)
This mode allowing the patient to receive PS stoked with an adjustable pressure.
Continuous Positive Airway Pressure Ventilation (CPAP)
This mode is available.
Technical Specifications
Interfaces - Supply Connections (Back Side of Machine)
– Mains inlet: 100 - 230V, 50-60 Hz, IEC13
– Oxygen inlet: 2-6 bar, NIST
– Cooling inlet
– Air inlet
– Nurse call: NC and NO potential free relay contact, RJ11 (6p4c)
– Oxygen inlet: 2-6 bar, NIST
– Cooling inlet
– Air inlet
– Nurse call: NC and NO potential free relay contact, RJ11 (6p4c)
Supply Connections (Front of Machine)
– Inspiration port: 22mm OD, conical
– Patient sensor port
– Pressure: 6mm pneumatic line
– Flow: 6m pneumatic line
– Expiration port: 22mm ID, conical.
Suitable to plug in pneumatic expiration valve.
– Patient sensor port
– Pressure: 6mm pneumatic line
– Flow: 6m pneumatic line
– Expiration port: 22mm ID, conical.
Suitable to plug in pneumatic expiration valve.
Respiratory Settings
| RR | 2-40 bpm |
| I:E | 1:4-4:1 |
| Vt | 300-2000 mL |
| Psafety | 2-65 hPa |
| DPinsp | 1-60 hPa |
| PEEP | 1-40 hPa |
| Ps | 0-64 hPa |
| FiO2 | 21-100 vol.% |
| Insp Fl trigg | 0-10000 mL/min. |
| Exp. Fl.cycl perc. | 0-100 % of Peak flow. |
Dimensions
| Main device | 32cm x 38 cm x 20 cm (l*w* h) |
Alarming : All required alarms from standards are available including light and sound profiles including
Audible and/or visual alarms for ventilation volume, tidal volume, oxygen concentration, low oxygen, power failure and plus other alarm settings.
Alarm Default Values
| Setting | Min | Max | Unit | Default Minimum Value | Default Maximum Value | |
| 1 | PEEP | 0 | 56 | mbar | 75% of confirmed setting | 125% of confirmed setting |
| 2 | 300-2000 mL | 1 | 65 | mbar | 75% of confirmed setting | 125% of confirmed setting |
| 3 | PC above PEEP | 0 | 20000 | mL/min | 75% of confirmed setting | 125% of confirmed setting |
| 4 | Vte | 200 | 1200 | ml | 75% of confirmed setting | 125% of confirmed setting |
| 5 | RR | 2 | 40 | bpm | 75% of confirmed setting | 125% of confirmed setting |
| 6 | FiO2 | 18 | 110 | % | 90% of confirmed setting | 110% of confirmed setting |
GUI : Graphical User Interface Presenting
Ventilator Settings
– PC: PEEP, PCabove peep, RR, I:E, O2, flow trigger
– PCVR: PEEP, Vt, RR, I:E, O2, flow trigger
– PS: PEEP, PSabove peep, FCT o Measurements and linked alarms (low and high)
– PEEP, Ppeak, Mve, Vte, FiO2, RR Time graphs
– Pressure, flow, volume
– PC: PEEP, PCabove peep, RR, I:E, O2, flow trigger
– PCVR: PEEP, Vt, RR, I:E, O2, flow trigger
– PS: PEEP, PSabove peep, FCT o Measurements and linked alarms (low and high)
– PEEP, Ppeak, Mve, Vte, FiO2, RR Time graphs
– Pressure, flow, volume
Alarm Settings
| MV | 0-20000 | mL/min. |
| Vt | 180-2000 | mL |
| RR | 2-60 | bpm |
| PEEP | 0-56 | hPa |
| Pplat | 0-70 | hPa |
| FiO2 | 18-103 | vol.% |
| Pmin PRVC | 1-64 | hPa |
| Pmax PRVC | 1-65 | hPa |
Accessories / MediVent ICU Components
| Description | Use | Comments | |
| 1 | Hose system | Single Use |
Any dual limb system, length between 0.7m and 2m, heated or not No antistatic or electrically conductive hoses. |
| 2 | Outlet filter | Single Use |
Any regular bacterial filter with standardized connections for breathing systems, compatible with NEN-EN-ISO 23328-1:2008 and NEN-EN-ISO 23328-2:2009 |
| 3 | HME filter | Single Use | Any regular HME filter with standardized connections for breathing systems |
| 4 | Patient flow sensor | Single Use | Contact the supplier through disposables@demcon.com |
| 5 | Hose connection | Single Use | Any hose connector |
| 6 | Expiration valve | Single Use | Contact the supplier through disposables@demcon.com |
| 7 |
Expiration valve pressure control hose |
Single Use | Any silicon pneumatic hose for expiration valve pressure control blue (external 120mm) |
| 8 | Machine air inlet filter | Single Use | Camfil 95300 |
| 9 | O2 sensor | Single Use | Any regular galvanic O2 cell using a screw connection, M16x1 |
| 10 | Bacteria virus filter | Single Use | |
Additional Functionality
– Ventilation mode swapping without ventilation interruption
– O2 boost
– Generate 100% O2 to the patient for 2 minutes
– Tidal volume calculation based on predicted body weight
– Can be used with trolley or hooked to bed for easy transport
– Rail mount on Trolly for humidification device connection
– Back-up battery
- Proximal flow sensor for precise measurements
- Integrated back-up battery
- System can work ith or without Oxygen supply, can work with air from environment.
– O2 boost
– Generate 100% O2 to the patient for 2 minutes
– Tidal volume calculation based on predicted body weight
– Can be used with trolley or hooked to bed for easy transport
– Rail mount on Trolly for humidification device connection
– Back-up battery
- Proximal flow sensor for precise measurements
- Integrated back-up battery
- System can work ith or without Oxygen supply, can work with air from environment.
Questions? No problem. Call or email us….
CALL: (323) 389-6028
CLIENT TESTIMONIALS
The Medi-Inject has been critical for my practice. We have noticed excellent results in utilizing the device with PRP, and many other injectable materials.
Dr Larry Vigilia Refresh
Medical Aesthetics
The Medi-Inject [automated injector] will not replace the need for single syringe delivery using fillers, however, for many other applications, the Medi-inject has the potential to transform the dermatologic industry.
Dr Asher Milgrom
AMA Skincare